A Beginner's Guide to Setting up Pure-FTPd Server on Ubuntu 20.04

FTP or File Transfer Protocol is a popular method of transferring files between computers over the internet. Pure-FTPd is a free and secure FTP server software that is widely used by system administrators. In this guide, we will walk you through the steps to set up Pure-FTPd Server on Ubuntu 20.04.

Table of Contents

1. Prerequisites
2. Installation of Pure-FTPd Server
3. Configuring Pure-FTPd Server
4. Adding Users to Pure-FTPd Server
5. Testing Pure-FTPd Server

Prerequisites:

Before proceeding with the installation process, ensure that you have the following prerequisites:

1. A running instance of Ubuntu 20.04 with a non-root user account that has sudo privileges.
2. A stable internet connection.
3. Basic knowledge of the command-line interface.

Installation of Pure-FTPd Server:

To install Pure-FTPd Server on Ubuntu 20.04, follow the below steps:

1. Update your system's package list by running the following command:

sudo apt update

2. Install the Pure-FTPd package by running the following command:

sudo apt install pure-ftpd

3. Once the installation is complete, start the Pure-FTPd service by running the following command:

sudo systemctl start pure-ftpd

4. You can also enable the service to start automatically at system boot time by running the following command:

sudo systemctl enable pure-ftpd

Configuring Pure-FTPd Server:

To configure Pure-FTPd Server, follow the below steps:

1. Open the Pure-FTPd configuration file by running the following command:

sudo nano /etc/pure-ftpd/pure-ftpd.conf

2. In the configuration file, you can customize various settings such as FTP port, passive mode settings, logging, and more.

3. Once you have made the necessary changes, save and close the file by pressing "CTRL + X," followed by "Y" and then "ENTER."

4. Restart the Pure-FTPd service by running the following command:

sudo systemctl restart pure-ftpd

Adding Users to Pure-FTPd Server:

To add users to Pure-FTPd Server, follow the below steps:

1. Create a new user account by running the following command:

sudo adduser ftpuser

2. Set a password for the new user account by running the following command:

sudo passwd ftpuser

3. Grant the new user account access to the FTP directory by running the following command:

sudo usermod -d /var/ftp ftpuser

4. Restart the Pure-FTPd service by running the following command:

sudo systemctl restart pure-ftpd

Testing Pure-FTPd Server:

To test the Pure-FTPd Server, follow the below steps:

1. Open your FTP client software and connect to your server's IP address.

2. Enter the username and password for the user account you created earlier.

3. Once you are connected, you can upload, download, and manage files on your server.

In this guide, we have shown you how to install, configure, and test Pure-FTPd Server on Ubuntu 20.04. With these steps, you can set up a secure and reliable FTP server that can be used for file transfer between computers. We hope this guide has been helpful to you.

Related Searches and Questions asked:

Setting Up Pure-FTPd Server on CentOS 7

How to Install and Configure Pure-FTPd Server on Ubuntu 22.04

Setting up Pure-FTPd Server on RHEL 7 Linux

Setting up Pure-FTPd server on CentOS 8

That's it for this post. Keep practicing and have fun. Leave your comments if any.